TruXedo® Pro X15
Answers to frequently asked questions about the TruXedo Pro X15 Roll-Up Truck Bed Cover.
- How do I care for the fabric of my Pro X15 truck bed cover?
- How do I adjust the tension on my truck bed cover?
- I have a toolbox on my truck already. Can I still get a Pro X15 to fit on my truck?
- Can I lock the Pro X15?
- Will the TruXedo® Pro X15 work with a 5th wheel?
- I live in a region that is very hot. Will the TruXedo® Pro X15 fabric fade in the sun?
- Can I buy the TruXedo® Pro X15 direct from the factory?
- Where do I find the Serial Number on my Pro X15?
- Why is my cover holding water after the rain?
The woven fabric on your truck bed cover can be cleaned with mild soap, water, and soft fine bristle brush. The cover may be hand washed or safely cleaned in the carwash of your choice.
The Pro X15 truck bed cover has rear mounted automatic tension control. There are two spring loaded steel plungers at the rear of the bed that maintain constant tension, allowing the cover to stay tight in any weather. Initially, you need to set the tension. This should be done during the warmest, sunniest part of the day by closing the cover, releasing the hook and loop fasteners from both sides near the cab, and checking compression of the spring plungers against the rear header. Roll cover open to make adjustments. Repeat until satisfactory tension is achieved, refer to step 15 of the Pro X15 owner’s manual for more specific information.
Currently, the Pro X15 truck bed cover cannot be made to fit with an existing toolbox. However, the Lo Pro can be custom built to fit with your toolbox, please see Custom Covers located under the Products tab.
The TruXedo® Pro X15 secures automatically when latched at the rear, and provides added security when used with a locking tailgate. It cannot be opened until the tailgate is unlocked and opened. There are no additional locks or sliding mechanisms needed to lock the cover.
Yes! Simply roll the cover all the way open and secure with security straps at the front of the bed. This allows you full access to your 5th wheel.
The fabric used in the TruXedo® Pro X15 is very high quality and has been tested in extreme conditions. It is UV-protected and will not fade in the sun.
We manufacture the TruXedo® Pro X15 here at the factory and sell through our wholesale distribution network. We do not sell direct to the public. We would be happy to assist you in finding a dealer in your area or a website to order from. Just call 1-877-878-9336 or click on Buy Now on the TruXedo® website.
Roll the cover to the cab of the truck, the serial number can be found on a silver sticker attached to the front aluminum bar, on the driver side.
Water pooling on a fabric cover is normal. Our cross tubes are not arched, the covers are designed to sit flat, so some water will sit on the vinyl. Once you drive your truck, the water will move off the cover and return to its original shape. Make sure to re-tighten the hook and loop fasteners along the length of the bed.